In the [ (Play)] menu, select [Slide Show] and press the <SET> button.
Select [Program] using the or arrow and select between [All images] or one of [Show 1]-[Show 3] using the or arrow.
Select [Start] using the or arrow and press the <SET> button. The show will start and automatically stop when the show is done.
Pausing and Resuming a Slide Show Press the <SET> button to pause the show. Press it again to resume.
Fast Forward/Rewinding a Slide Show Use the or arrow to move to the previous or next image.
Stopping a Slide Show Press the <MENU> button during a slide show to stop it and display the slide show menu.
When the slide show is over, press the <MENU> button. The slide show appears again. Press the <MENU> button again to close the menu.
Movie images play for the length of time that they were recorded regardless of the time set in the slide show settings.
The power saving function is disabled while slide show plays on the camera.
Selecting Images for Slide Shows
You can mark images for inclusion in slide shows 1-3. Up to 998 images may be marked per slide show. Images display in the order of their selection.
In the [ (Play)] menu select [Slide Show]
Select [Program] using the or arrow and select between [All images] or one of [Show 1]-[Show 3] using the or arrow.
A checkmark ( ) will appear beside a show already containing images.
Choose [Select] using the and or arrows and press the <SET> button.
Mark images to include in the show.
Single Image Playback
Move between images using the or arrow and mark or remove marks from images using the or arrow.
The selection number and a check mark appear at the bottom of selected images.
Index Playback
Turn the zoom lever toward to switch to index playback (3 images).
Select an image using the or arrow and mark or remove marks from images using the or arrow.
The selection number and a check mark appear at the bottom of selected images.
After you press the <SET> button, you can select all the images by selecting [Mark All] using the or arrow and pressing the <SET> button again. You can deselect all the images by selecting [Clear all].
You can select images using the or arrow and change the setting using the or arrow after [Mark All] or [Clear all] has been selected.
Press the <MENU> button. The image selection screen will close.
Adjusting the Play Time and Repeat Settings
Play Time
Sets the duration that each image in a slide show is displayed. The options are any one of 3-10 seconds, 15 seconds, 30 seconds and Manual.
Repeat
Sets whether the slide show stops when all the slides have been displayed or continues to display until stopped.
In the [ (Play)] menu, select [Slide Show] and press the <SET> button.
Select [Set up] using the or arrow and press the <SET> button.
Select [Play Time] or [Repeat] using the or arrow.
Select a setting using the or arrow.
Play Time Select a play time
Repeat Select [On] or [Off]
Press the <MENU> button. The setup menu closes.
The display interval may vary somewhat for some images.