Lower the RX Start Speed
The receive start speed is specified 33600 bps in the default setting, however you may not be able to receive a fax depending on the status of the recipient fax machine or the line. Select a slower receive speed using following procedure.
1. Press [
] (Menu).
2. Press [
] or [
] to select <System Management Settings>, and then press [OK].
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0087014.gif)
When the system manager PIN is specified
Enter the system manager PIN.
When you are finished entering, press [
] or [
] to select <Apply>, and then press [OK].
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0087016.gif)
3. Press [
] or [
] to select <Communication Management Settings>, and then press [OK].
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0087020.gif)
4. Press [
] or [
] to select <Fax Settings>, and then press [OK].
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0087099.gif)
5. Press [
] or [
] to select <RX Start Speed>, and then press [OK].
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0087100.gif)
6. Press [
] or [
] to select the receive start speed, and then press [OK].
![](/library/attachments/ServiceWareImages/LDImages/WSSS/NewWSSSImages/G0087101.gif)
7. Press [
] (Menu) to close the menu screen.
The setting is complete.