Setting IP Addresses
Article ID: ART171915 | | | Date published: 09/21/2018 | | | Date last updated: 03/08/2023 |
Description
This article covers how to assign an IP address to the device. There are two options.
- Automatically - The network will use a dynamic IP addressing protocol such as DHCP to assign the address.
- Manually - The administrator will need to enter the IP address for the printer on the control panel of the printer. This is also known as setting a Static IP address.
Solution
Solution |
Connecting the machine to a network requires a unique network IP address. Two versions of IP addresses are available: IPv4 and IPv6. Configure these settings depending on the network environment. To use IPv6 addresses, you need to properly configure the IPv4 address settings.
Setting IPv4 Address The machine's IPv4 address can be either assigned automatically by a dynamic IP addressing protocol, such as DHCP, or entered manually. When connecting the machine to a wired LAN, make sure that the connectors of the LAN cable are firmly inserted into the ports (
![]()
![]()
1. Display the <Menu> screen.
![]() Select <Menu> in the Home screen.
![]() Press
![]()
2. Select <Network Settings>.
3. Select <TCP/IP Settings>
![]() ![]()
4. Configure IP address settings.
![]()
<Auto Acquire>
Select to automatically assign an IP address via DHCP protocol. When <On> is displayed, automatic addressing is enabled.
<Manually Acquire>
Select to configure the IP address settings by manually entering an IP address. In order to select this option, the automatic acquirement must be set to <Off>.
<Check Settings>
Select when you want to view the current IP address settings.
![]()
4-A-1. Select <Auto Acquire>.
4-A-2. Select the protocol.
4-A-3. Check that <Auto IP> is set to <On>.
4-A-4. Select <Apply>.
![]()
4-B-1. Configure a setting to disable auto-acquisition.
4-B-2. Select <Manually Acquire>.
4-B-3. Specify the IP address, subnet mask, and gateway address (or default gateway).
![]()
1. Display the <Menu> screen.
![]() Select <Menu> in the Home screen.
![]() Press
![]()
2. Select <Network Settings>.
3. Select <TCP/IP Settings>
![]() ![]()
4. Enter the IPv4 address of another device on the network, and select <Apply>.
![]()
Setting IPv6 Addresses The IPv6 addresses of the machine can be configured via the Remote UI. Before setting IPv6 addresses, check the IPv4 address settings. You need to set the correct IPv4 settings to use IPv6 addresses. Note that the scan function that uses the scanner driver or MF Scan Utility is not available in an IPv6 environment. The machine can use the following multiple IPv6 addresses:
1. Start the Remote UI and log in to System Manager Mode.
2. Click [Settings/Registration] on the Portal page.
3. Select [Network Settings]
![]()
4. Click [Edit] in [IPv6 Settings].
5. Select the [Use IPv6] check box and configure the required settings.
![]() [Use IPv6]
Select the check box to enable IPv6 on the machine. When not using IPv6, clear the check box.
[Use Stateless Address]
Select the check box when using a stateless address. When not using a stateless address, clear the check box.
[Use Manual Address]
When you want to manually enter an IPv6 address, select the check box and enter the IP address, prefix length, and default router address in the corresponding text boxes.
[IP Address]
Enter an IPv6 address. Addresses that start with "ff" (or multicast address) and the loopback address (::1) cannot be entered.
[Prefix Length]
Enter a number that indicates how many bits are available for the network address.
[Default Router Address]
Specify the IPv6 address of the default router as necessary. Addresses that start with "ff" (or multicast address) and the loopback address (::1) cannot be entered.
[Use DHCPv6]
Select the check box when using a stateful address. When not using DHCPv6, clear the check box.
6. Click [OK].
Viewing Network Settings
![]() ![]() ![]() ![]() ![]() ![]() ![]()
![]() ![]() ![]() ![]() ![]() ![]() ![]()
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
![]()
1. Display the <Menu> screen.
![]() Select <Menu> in the Home screen.
![]() Press
![]()
2. Select <Network Settings>.
3. Select <Ethernet Driver Settings>.
![]()
![]()
1. Display the <Menu> screen.
![]() Select <Menu> in the Home screen.
![]() Press
![]()
2. Select <Network Settings>.
3. Select <Wireless LAN Settings>.
4. Read the message that is displayed, and select <OK>.
5. Select <Wireless LAN Information>.
6. Select the setting to view.
![]()
|
||||||||||
Related Info | Basic Network Settings | ||||||||||
ID: 8204108300_EN_2
|
SIMS Doc Id
8204108300