System Accessory Limitations for EOS Rebel T6 / EOS 1300D
Article ID: ART165567 |
| |
Date published: 04/22/2016 |
| |
Date last updated: 12/06/2017 |
Description
System Accessory Limitations for EOS Rebel T6 / EOS 1300D
Solution
Solution |
Interchangeable Lenses
Some new types of telephoto lenses* |
Focus preset is not possible during Live View shooting or movie shooting. |
Contrast AF when the STM lens is used |
Contrast AF is not capable of smooth AF as hybrid CMOS AF. |
EF8-15mm f/4L Fish-eye USM |
Due to the system specifications, this lens may not be able to achieve sufficient distortion correction using the Digital Photo Professional. |
Lenses with serial number communication
function |
Since the serial number of the lens cannot be identified, focusing cannot be adjusted for each lens of the same model based on the serial number. |
PowerZoomAdapter |
Zoom operations cannot be performed from Camera Connect or EOS Utility. |
*Lens
ã»EF300mm f/2.8L IS II USM
ã»EF400mm f/2.8L IS II USM
ã»EF400mm f/4L DO IS II USM
ã»EF500mm f/4L IS II USM
ã»EF200-400mm f/4L IS USM |
System Accessory Compatibility
Macro Ring Lite MR-14EX II |
Flash ratio cannot be set. |
600EX-RT/600EX |
Following function settings cannot be set from the camera. (Set with the flash.)
⢠20/135/200 mm setting for flash zoom (flash coverage)
⢠250/300/350/400/450/500 Hz setting for stroboscopic flash |
600EX-RT |
Following function settings cannot be set from the camera. (Set with the flash.)
⢠Radio transmission wireless flash shooting settings following restrictions apply to Radio transmission wireless flash shooting settings.
⢠Flash sync speed becomes one step slower.
⢠High-speed sync cannot be used because it will lead to an improper shooting result.
⢠Group firing is not possible.
⢠Firing modeling flash or releasing the shutter from the receiver unit is not possible.
|
GP-E2 |
⢠Connect the camera and GP-E2 with the connection cable. Transmission via the hot shoe is not supported.
⢠Shooting direction is not recorded. (The digital compass does not work.)
⢠Location information for the initial position of movie shooting can be added; however, the location information can be checked only with the camera. (Not displayed using Map Utility.) |
Camera Connect |
Even if multiple faces are detected during Face detection Live mode, Camera Connect cannot select another face. |
|
ID: 8202876700_EN_2
|