Replacing the Maintenance Cartridge (iPF510)
Important
- Do not remove the Maintenance Cartridge except to replace it.
- To prevent ink from leaking from a used Maintenance Cartridge , avoid dropping the cartridge or storing it at an angle. Otherwise, ink may leak and cause stains.
- Ink adheres to the top of the Maintenance Cartridge after it has been used. Handle the Maintenance Cartridge carefully during replacement. The ink may stain clothing.
- The remaining Maintenance Cartridge capacity is recorded on each printer. Do not install a used Maintenance Cartridge in another printer.
- Make sure no print jobs are in progress.
- Holding the Output Tray on sides by the far end, press the button to release the lock, and then remove the tray.
- Open the plastic bag of the new Maintenance Cartridge and remove the packaging material. Holding the handles on sides (a), remove the cartridge.
- Hold the handle (a) of the used Maintenance Cartridge and pull out the cartridge. Grasp the handles on sides (b) and keep the cartridge level as you remove it.
- Keeping the used Maintenance Cartridge level, put it in the plastic bag that was in the box, as shown.
- Expel air in the plastic bag and seal the zipper. Fold the plastic bag in half.
- Put the used Maintenance Cartridge and packaging material in the box for storage, just like the new Maintenance Cartridge was, keeping it level.
- Holding the handles on sides of the new Maintenance Cartridge (a), insert it completely, keeping it level.
- Hold the Output Tray on sides by the near end. Aligning the Output Tray with the guides (a), insert it into the printer until it locks in place.