![/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/PowerShot%20SD700IS/SD700acntmov.gif](300%20color%20accent_files/image001.gif)
| Color Accent | Use this option to have only the color specified in the LCD monitor remain and to transform all others to black and white. |
![/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/PowerShot%20SD700IS/SD700clrswap.gif](300%20color%20accent_files/image002.gif)
| Color Swap | Use this option to transform a color specified in the LCD monitor into another. The specified color can only be swapped into one other color, multiple colors cannot be chosen. |
Changing the Save Method for the Original Image
Shooting in the Color Accent Mode.
- Select the Color Accent Mode:
![/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/PowerShot%20SD960/SD960ColorAccent.jpg](300%20color%20accent_files/image003.jpg)
1. Select
Color Accent.
Set the mode switch to
then press the <FUNC./SET> button.
Press the
or
buttons to select [P] then press the <FUNC./SET> button.
Press the
or
buttons to select
then press the <FUNC./SET> button.
2. By pressing the <DISP.> button the camera will switch to color input mode and the display will alternate between the original image and the color accent image (using the previously set color).
![/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/PowerShot%20SD960/SD960ColorAScrn.jpg](300%20color%20accent_files/image008.jpg)
3. Aim the camera so that the color you wish to retain appears at the center of the LCD monitor and press the
button.
- Only one color can be specified.
- You can use the
or
button or use the <Control Dial> to specify the range of colors that are retained.
• -5: Only takes the color that you want to retain.
• +5: Also takes colors close to the one that you want to retain.
4. Press the [MENU] button to complete the setting and then shoot.
![/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/PowerShot_A60_A70/note_icon_A70.gif](300%20color%20accent_files/image010.gif)
- The default color accent is green.
- You may not obtain the expected results after color input mode if you use the flash, or change the white balance or metering settings.
- The chosen Color Accent is retained even if the camera's power is turned off.
|
Shooting in the Color Swap Mode.
![/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/PowerShot%20SD700IS/SD700swap.gif](300%20color%20accent_files/image011.gif)
Select the Color Swap mode:
![/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/PowerShot%20SD960/SD960ColorSwap.jpg](300%20color%20accent_files/image012.jpg)
1. Select
Color Swap.
Set the mode switch to
then press the <FUNC./SET> button.
Press the
or
buttons to select [P] then press the <FUNC./SET> button.
Press the
or
buttons to select
then press the <FUNC./SET> button.
2. By pressing the [MENU] button, the camera will switch to color input mode and the display will alternate between the original image and the color swap image (using the previously set color).
![/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/PowerShot%20SD960/SD960ColorSw.jpg](300%20color%20accent_files/image014.jpg)
3. Aim the camera so that the original color appears at the center of the LCD monitor and press the
button.
![/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/PowerShot%20SD960/SD960ColorSwpSel.jpg](300%20color%20accent_files/image015.jpg)
- Only one color can be specified.
4. Aim the camera so that the desired color appears at the center of the LCD monitor and press the
button.
![/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/PowerShot%20SD960/SD960ColorSwa.jpg](300%20color%20accent_files/image017.jpg)
• Only one color can be specified.
- You can use the
or
button to specify the range of colors that are retained.
• -5: Only takes the color that you want to retain.
• +5: Also takes colors close to the one that you want to retain.
5. Press the [MENU] button to complete the setting and then shoot.
![/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/PowerShot_A60_A70/note_icon_A70.gif](300%20color%20accent_files/image010.gif)
- The default setting for color swap mode changes green into white.
- You may not obtain the expected results if you use the flash.
- The colors specified in the color swap mode are retained even if the camera's power is turned off.
|