➤
Home
Articles
FAQs
Ask a Question
Search
Models related to this article
imageFORMULA DR-M140
Home
Articles
Articles Detail
Replacing the Retard Roller.(DR-M140)
Article ID: ART111952
|
Date published: 05/11/2015
|
Date last updated: 12/22/2015
Description
Use the following procedure to remove/replace the Retard roller.
Solution
Use the following procedure to remove/replace the retard roller.
Open the document feed tray.
Raise the OPEN lever, and open the upper unit.
Unlock the roller cover and open it.
Remove the retard roller.
Install the (new)retard roller.
Press the roller cover to close it.
Close the upper unit by gently pushing down on the left and right sides. Push until it clicks into place to make sure that it is completely closed.
Close the document feed tray.
SIMS Doc Id
0
Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments
Rate Article