1. Press
[Menu].
2. Press
or
to select <ADDRESS BOOK SET.>, then press [OK].
If a password has been set for the Address Book, enter the password using
Ö
[numeric keys], then press [OK].
3. Press
or
to select <1-TOUCH SPD DIAL>, then press [OK]
4. Press
or
to select a one-touch key (01 to 20) for which you want to register the fax number, then press [OK].
You can also select a one-touch key by pressing the corresponding one-touch key.
5. Press
or
to select <FAX>, then press [OK].
6. Press
or
to select <TEL NUMBER ENTRY>, then press [OK].
7. Use
-
,
[numeric keys] and
[Tone] to enter the fax number you want to register (40 digits maximum), then press [OK].
8. Press
or
to select <NAME>, then press [OK].
9. Use
-
,
[numeric keys] and
[Tone] to enter the destination's name (16 characters maximum), then press [OK].
If you want to specify the following optional settings (<LONG DISTANCE>, <TX SPEED>, and <ECM>) for the fax number you are registering, go to the next step.
If you do not need to set these options, skip to step 18.
10. Press
or
to select <OPTIONAL SETTING>, then press [OK].
11. Press
or
to select <ON>, then press [OK].
12. Press
or
to select <LONG DISTANCE>, then press [OK].
13. Press
or
to select the most effective transmission option, then press [OK].
- <DOMESTIC>: Normally select this option.
- <LONG DISTANCE 1-3>: Select one of these options when you make an international call. If errors occur during fax transmissions, try the setting from <LONG DISTANCE1> through <LONG DISTANCE 3>.
14. Press
or
to select <TX SPEED>, then press [OK].
15. Press
or
to select the sending speed (33600 bps, 14400 bps, 9600 bps, or 4800 bps), then press [OK].
If transmission errors occur frequently, lower the speed.
16. Press
or
to select <ECM>, then press [OK].
17. Press
or
to select <ON> to reduce system and line errors while sending to or receiving from other machines that support ECM, then press [OK].
To register another one-touch key, repeat the procedure from step 4.
18. Press
[Stop/Reset] to return to the standby mode.