Sending Faxes by Entering the Fax / Telephone Number from the Operation Panel - TR7520
Article ID: ART173681 |
| |
Date published: 02/18/2019 |
| |
Date last updated: 02/18/2019 |
Description
This article explains how to send a fax by entering in the recipient's number using the operation panel of the PIXMA TR7520.
Solution
This section describes dialing and sending faxes directly by entering the fax/telephone numbers.
Important
-
Make sure that printer is turned on.
-
Load documents on the platen glass or in the ADF.
-
Select FAX on the HOME screen.
The Fax standby screen is displayed.
-
Receive mode
The receive mode selected currently is displayed.
-
Date and time
The date and time are displayed.
-
Entry field of fax/telephone numbers
Select to display the screen to enter the fax/telephone numbers.
-
Function list
You can use the each fax function and change the setting for the fax.
-
Redial
Select to send faxes with redialing.
-
On hook dial
Select to send faxes with the on hook dial function.
-
Directory
You can select a registered fax/telephone number.
-
Current state
The current state is displayed.
-
Send Settings
Note
- If you have not set up the printer for sending/receiving faxes yet, the message for setup is displayed on the touch screen when you select FAX on the HOME screen for the first time. When you set up for faxing, follow the procedure according to the instructions on the touch screen.
-
Dial recipient's fax/telephone number.
-
Select entry field of fax/telephone numbers.
-
Enter fax/telephone number.
-
Numeric keys
Enters the number.
-
Pause
Enters a pause "P".
-
Delete
Deletes the entered number.
-
Blank space
Enters a blank space.
-
Select OK.
The touch screen returns to the Fax standby screen.
-
Press Color button for color transmission, or Black button for black & white transmission.
The printer starts scanning the document.
Important
- Color transmission is available only when the recipient's fax device supports color faxing.
- Do not open the document cover until scanning is completed.
-
Start sending.
-
If you load the document in the ADF:
The printer scans the document automatically and starts sending the fax.
Note
- To cancel a fax transmission, press the Stop button. To cancel a fax transmission while it is in progress, press the Stop button, and then follow the instructions on the touch screen.
- If documents remain in the ADF after the Stop button is pressed while scanning is in progress, Document in ADF. Remove the document from the document tray and tap [OK]. is displayed on the touch screen. By selecting OK, the remaining documents are automatically ejected.
-
If you load the document on the platen glass:
After scanning the document, the confirmation screen asking you if you load the next document is displayed.
To send the scanned document, select Send now to start sending it.
To send two or more pages, follow the message to load the next page, and select Scan. After scanning all pages, select Send now to start sending.
Note
- To cancel sending the fax, press the Stop button.
Note
- When your printer is connected to a PBX (Private Branch Exchange) system, refer to the operating instructions of the system for details on dialing the recipient's fax/telephone number.
-
In case the printer was not able to send a fax, such as when the recipient's line was busy, it has the function to automatically redial the number after a specified interval. Automatic redialing is enabled by default.
- Do not unplug the power cord until all documents are sent. If you unplug the power cord, all unsent documents stored in the printer's memory are lost.