Adjust./Cleaning Menu-ICMF 6500
Article ID: ART126937 |
| |
Date published: 05/12/2015 |
| |
Date last updated: 10/16/2015 |
Description
Adjust./Cleaning Menu
Solution
Adjust./Cleaning Menu Menu
Setting Item
|
Description
|
1. TRANS. ROLR CLEAN |
Cleans the transcription roller. |
2. FIX.UNIT CLEANING |
Cleans the fuser roller. |
3. FEEDER CLEANING |
Cleans the ADF. |
4. SPECIAL MODE M |
Sets to improve print quality or fix irregular print density. If print quality decreases or an irregularity in the print density appears, transcription output may not function adequately. |
111MID |
Selects in normal conditions. |
111LOW |
Selects to compensate for poor print quality that occurs when using paper that was stored for a long time at high temperatures and high humidity. |
111HIGH |
Selects to compensate for poor quality that occurs when using heavyweight paper. |
5. SPECIAL MODE N |
When two-sided printing function is used, paper may curl severely or become jammed. Enable this setting to prevent paper curling or jamming. - OFF - ON |
6. SPECIAL MODE O |
This setting is not functional in this model. |
7. SPECIAL MODE P |
Sets to activate when lightweight paper or paper which is easy to get uneven print density is used for printing. - OFF - ON |
8. SPECIAL MODE Q |
Enable this setting if black or white spots appear on the printed image. - OFF - ON |
9. SPECIAL MODE R |
Sets whether to prevent white streaks from appearing on the printed image. When you print the halftone image or photograph after the machine has not undergone any operation for a while, the first page of printouts may have thin white streaks on the printed image. - OFF - ON |
10. SPECIAL MODE S |
Sets whether to reduce the waiting time for the next printout. When you change the paper size after continuous printing, the machine may take a while to start the next printing. |
111OFF |
Does not reduce the waiting time next set of printout. (default) |
111SPEED PRIORITY |
Reduces the waiting time to start the next set of printout. Print speed has priority; however, a condition that an previously printed image also appears faintly on the next output may occur. |
11.CONT. PRINT MODE |
Sets whether to prevent the back edge of the previous page from appeaing on the following page during continuous printing of half-tone prints or photographs. - OFF - ON |
12.BACK EDGE MODE |
Sets whether to prevent back edge of paper from smudging. - OFF - ON |
13.LARGE PAPER MODE |
Sets whether to improve toner fix on large-sized paper. - OFF - ON |
14.AUTO ADF DIRTY ADJ |
Sets whether to activate smudge (due to dust or dirt) reduction during printing. When the ADF is dirty, copies may contain unwanted dots or lines. - OFF - ON |
15.MAINTENANCE CODE |
This setting is not functional in this model. |