You can configure image stabilization via the camera menu when using an EF-M lens with image stabilization.
NOTE
- Lenses with built-in image stabilization are named with "IS". IS stands for Image Stabilizer.
Changing the IS Mode Settings
For non-IS lenses, such as EF-M 22mm F2 STM, the [Image Stabilizer] menu option will not be displayed.
For lenses equipped with an IS feature, such as EF-M 18-55mm F3.5-5.6 IS STM, refer to the following procedure to set IS. At the time of purchase, the [Image Stabilizer] option is set to [Enable].
1. Set the cameraâs power switch to [ON].
2. Press the [MENU] button.
3. Press the [ ], [ ] buttons or turn the [ ] dial to choose the [ - 4] tab.
Press the [ ], [ ] buttons or turn the [ ] dial to choose [IS Settings], then press the [ ] button.
4. Press the [ ], [ ] buttons or turn the [ ] dial to choose [IS Mode], and then press the [ ] button.
NOTE
- [IS Mode] is not displayed for lenses other than EF-M lenses. Use the image stabilization switch on the lens instead.
6. Press the [ ], [ ] buttons or turn the [ ] dial to choose the desired option, and then press the [ ] button.
Continuous | Corrects camera movement or camera shake using built-in image stabilization performed by the lens. |
Off | Deactivates image stabilization. |
7. To return to the previous screen, press the [MENU] button.
The Mount Adapter EF-EOS M is used to attach EF lenses to the EOS-M. When an IS equipped EF lens is used, the setting will be made with the lens instead of the cameraâs menu.
The Image Stabilizer will operate when the lensâ [STABILIZER] (Image Stabilizer switch) is set to [ON] as shown in the bellow image.
Non-IS EF lenses do not include a [STABILIZER] (Image Stabilizer switch).
NOTE
- If image stabilization cannot prevent camera shake, mount the camera on a tripod or take other measures to hold it still. In this case, set [IS Mode] to [Off].
|