How do I replace or clean the rollers and separation pad in my R10 scanner?
Article ID: ART177389
|
Date published: 08/31/2020
|
Date last updated: 08/31/2020
Description
The feed roller and separation pad inside the R10 scanner are consumable parts and will wear with scanning. If either the feed roller or the separation pad or both are worn, documents may not feed correctly and paper jams may occur.
In this event, follow the steps outlined below to replace the feed roller and separation pad.
Solution
Open the feed tray.
Open the feeder cover.
Open the roller cover.
Slide the feed roller to the left and then remove it.
Remove the separation pad.
Attach the separation pad.
Attach (new) feed roller. Align the notch on the roller with the shaft on the main unit side.
Slide the feed roller to the right.
Completely close the roller cover so that it clicks into place.
Failure to securely close the feed cover will cause document feed problems.