How to set High-Speed Continuous Shooting (High-speed Burst)
You can shoot continuously while the shutter button is pressed and held down fully.
For the PowerShot ELPH 300 HS / IXUS 220 HS, the maximum speed for continuous shooting is approximately 8.2 images/second, and for the PowerShot ELPH 100 HS / IXUS 115 HS, the maximum speed for continuous shooting is approximately 8.0 images/second.
- Recording pixels are fixed to 1984 x 1488 pixels (
).
- Focus, exposure and white balance settings are set with the first shot.
- Depending on the shooting conditions, camera settings and the zoom position, the shooting speed may slow down.
- As the number of images increases, the shooting interval may take longer.
- [ISO speed] is set to [AUTO] (
).
- The main functions that are not available in the [High-speed Burst] (
) mode are as follows:
|
1. Set the <Mode Switch> to [Shooting] (
) and then press the <Power> button.
2. Press the <FUNC./SET> (
) button.
3. The following screen appears on the LCD monitor.
Operate the <directional buttons> up or down to select the [Rec. Mode]. (If no changes have been made so far, [Program AE] (
) will be displayed.)
Press the <FUNC./SET> (
) button.
4. Operate the <directional buttons> up or down to select the [High-speed Burst] (
).
Press the <FUNC./SET> (
) button.
5. The following screen appears on the LCD monitor.
If the [High-speed Burst] (
) icon is displayed on the upper-right part of the screen, the setting is completed.
As long as you hold the down, the camera will shoot successive images.Viewing Each Image in a Group (Group Playback)
When playing back images, images taken in [High-speed Burst](
)mode are displayed in a group with only the first image displayed, however, grouped images can also be viewed individually.
Important:
- If you erase a grouped image, all the images in the group will also be erased. Be sure to exercise adequate caution.
Reference:
2. The last captured image will appear.
Operate the <directional buttons> left or right to choose an image that displays (
)
3. The following screen appears on the LCD monitor.
Press the <FUNC./SET> (
) button.
4. The following screen appears on the LCD monitor.
Operate the <directional buttons> up or down to choose [Group Playback](
), then press the <FUNC./SET>(
) button again.
5. The following screen appears on the LCD monitor.
Operate the <directional buttons> left or right to view images in the group individually.
To quit Group Playback, press the <FUNC./SET> button (
), press the <directional buttons> up or down to select [Exit Group Playback] (
), and then press the <FUNC./SET> button (
).