|
Set the power switch to <ON>, the flash recycling starts. |
Check that the flash is ready
- The pilot lamp will first turn green (ready for Quick Flash), the red (flash ready).
- Pressing the pilot lamp will fire a test flash.
|
QUICK FLASH
Quick flash enables a flash to be fired before flash-ready, when the pilot lamp is still green
Although the Guide Number (Gn) will be 1/6 to 1/2 that of the full output, Quick Flash is effective for nearby subjects and when you want a shorter recycle time
Set the drive mode to single shooting. Quick Flash cannot be used in the continuous shooting, FEB, manual flash and stroboscopic flash modes.
C.Fn - Quick Flash can also be used during continuous flash shooting - C.Fn 06
AUTO POWER OFF
To save battery power, the power will turn off automatically after a certain period (approx. 1.5min. to 15min.) of ideal time. To turn on the Speedlite again, press the camera's shutter button halfway. Or press the Speedlite's test firing button.
C.Fn - Auto Power Off can also be disabled - C.Fn 01