You can scan printed photos and print them all at one time.
-
Make sure that the machine is turned on.
-
Load the photo paper in the upper or lower cassette, depending on its size.
-
Press the MENU button.
-
Select Photo, then press the OK button.
-
Select Photo copy, then press the OK button.
-
Confirm the on-screen instructions, then press the OK button.
-
Load the printed photo on the platen glass following the on-screen instructions, then press the OK button.
When scanning is complete, the print settings confirmation screen is displayed.
-
Specify the settings as necessary.
Use the button to change the setting item and use the button to change the setting.
Note
-
Depending on the setting item, some settings cannot be specified in combination with the setting of other setting items. If the setting cannot be specified in combination is selected, Error details is displayed on the LCD. In this case, press the left Function button to confirm the message, then change the setting.
-
Page size
Select the page size of the loaded paper.
-
Type (Media type)
Select the media type of the loaded paper.
-
Print qlty (Print quality)
Select print quality according to the original.
-
Border (Bordered/Borderless print)
Select bordered or borderless print.
-
Photo fix
Select No correction, Auto photo fix, or Fade restoration.
Note
-
When No correction is selected, the machine prints the scanned image without correction.
-
When Auto photo fix is selected, the machine corrects the scanned image automatically.
-
When Fade restoration is selected, the machine corrects the scanned images that have faded over time.
-
Specify the number of copies by using the + or - button.
-
Press the Color button for color printing, or the Black button for black & white printing.
The machine starts printing.
Note
-
If the printed photo was not scanned properly, the confirmation screen asking you if you continue printing is displayed. By selecting Yes, the machine starts printing. If you rescan the photo, select No and scan the photo again.
MX922 Page