Setting the Receive Mode

1. Open the Fax Setup Utility by clicking the icon on the toolbar or by launching the application from the MultiPASS Desktop Manager folder on the hard drive

2. In the Fax Setup Utility, click the 'Receive Fax' tab. Click here to see setup options.

3. Choose the desired receive mode in the Receive Mode drop-down list in the Answer section. Select from the following:

Fax Telephone Switching (FaxTel): Automatically switch for receiving a call either as a fax or telephone call

Dedicated Fax Receive (FaxOnly): Automatically receive only fax calls

Manual Receive (Manual): Requires you to manually answer the incoming call, and then set the printer for an incoming fax

Answering Machine Mode (AnsMode): Automatically receive a call with your answering machine

Distinct Ring Pattern Detect (DRPD): Automatically switch between receiving a call either as a fax or telephone call based on the ring tone for each type of call. (U.S. only. This setting is applicable only if you subscribe to a special network service with your phone company that defines multiple ring tones for your phone line.)

4. Click 'OK' to save your selection.