There are two methods for connecting the DR-6010C scanner to a computer: USB connection, which makes use of a standard USB port on the computer, and SCSI connection, which makes use of a SCSI card installed in an expansion slot of the computer.
![](/library/attachments/ServiceWareImages/LDImages/ISG/DRscanners/6010C_caution.gif)
Do not connect a USB cable and SCSI cable at the same time.
Follow these steps to install the scanner using the USB connection:
- Verify that the power switch of the scanner is OFF.
If the power switch is in the ON position, push the switch to set it to OFF.
![](/library/attachments/ServiceWareImages/LDImages/ISG/DRscanners/6010C_USB1.gif)
- Plug the supplied power cord into the power connector on the back of the scanner.
![](/library/attachments/ServiceWareImages/LDImages/ISG/DRscanners/circle1.gif)
![](/library/attachments/ServiceWareImages/LDImages/ISG/DRscanners/6010C_USB4.gif)
- Connect the power cord into an AC outlet.
![](/library/attachments/ServiceWareImages/LDImages/ISG/DRscanners/circle2.gif)
- Use the supplied USB cable to connect the scanner to the computer.
![](/library/attachments/ServiceWareImages/LDImages/ISG/DRscanners/6010C_USB3.gif)