Installing the Battery Pack
Install Battery Pack NB-2LH (supplied) into the camera as follows. Use the Compact Power Adapter CA-PS700 (sold separately in the ACK-D20 AC adapter kit) to power the camera for extended periods.
- Charge the battery pack before using it for the first time.
- Check that the power is off and slide the battery cover in the direction of the arrow.
-
Insert the battery pack.
- The terminal side of the battery pack should face downward.
- Insert the battery pack all the way in until the battery lock clicks. To remove the battery pack, push the battery lock.
-
Slide the battery cover closed.
-
When the indicator blinks, the camera is writing, reading, erasing or transmitting an image to or from the card. Do not perform the following, or image data may be lost or corrupted:
- Do not shake the camera.
- Do not turn off the power or open the CF card/battery cover.
- Remove the battery pack when the camera is not in use.
|
Battery Status Symbols
The following icons indicate the battery status on the LCD display panel. These icons will not appear while the camera is powered with a compact power adapter.
|
Sufficient battery charge |
|
Low battery |
(Blinking) |
Replace or recharge battery |