Untitled Document
Installing the Print Head and Ink Tanks
Note: Be sure printer is powered on and cover is open.
Install the Print Head
1. Remove the print head from its package.
![](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/Printers_General/OpenPHPkg.gif)
2. Remove the orange protective cap.
Caution: Do not touch the electrical contacts on the back and bottom of the print head.
![](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/Printers_General/DoNotTouch.gif)
3. Raise the gray lock lever on the printer.
![](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/Printers_General/RaiseLockLever.gif)
4. Slide the print head into the holder until it is securely seated. Do not press it down.
![](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/Printers_General/PutPHInHolder.gif)
5. Lower the lever until it clicks into place.
![](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/Printers_General/LowerLock.gif)
Install the Ink Tanks
1. Remove the black ink tank (BCI-24 Black) from its package and pull off the orange protective cap.
NOTE: Avoid ink at the bottom of the tank.
![](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/Printers_General/RemoveCap.gif)
2. Insert the black ink tank into the slot on the right, then push in until the ink tank clicks into place.
IMPORTANT: For correct printer operation, make sure ink tanks are secure in slots.
![](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/Printers_General/SnapTankIn.gif)
3. Repeat the procedure for the color ink tank (BCI-24 Color), inserting it into the remaining slot.
![](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/Printers_General/TanksIn.gif)