Ask a Question

Press the Stop button on the MultiPASS

Article ID: ART158252 | Date published: 06/09/2015 | Date last updated: 08/18/2015
 

Description

Press the Stop button on the MultiPASS

Solution

Checksum Error

A checksum error on the printer's EEPROM will display various error messages.

  1. With the printer powered on, unplug the power cord at the printer.

  2. Wat approximately, 10 seconds to reset the printer.

  3. While holding down the Stop (or Stop / Reset) button, reconnect the power cord to the printer.

  4. Wait until the printer begins to prime the ink and then release the button.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments