Adjusting the playback volume
When you use the LCD screen for playback, the camcorder plays back the sound via built-in speaker. The speaker does not sound when you close the LCD panel. Use headphones when using the viewfinder.
![](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/Elura_80_Elura_85_Elura_90/Adjust_volume.gif)
When Using Headphones
The headphones terminal also serves as AV terminal. Headphones can only be used when "
" is displayed on the screen. If not, change the setting following the procedure below.
Open the menu and select [VCR SETUP]. Select [AV/PHONES
], set it to [PHONES
] and close the menu.
- The speaker does not sound when "
" is displayed.
- Do not connect headphones unless "
" is displayed as it produces noise.
|
Adjusting the Volume
Turn the SET dial up to increase the volume, and down to lower the volume.
- A volume bar appears for 2 seconds.
- You can turn off the volume completely by turning the <SET> dial down until [OFF] appears. Turn the <SET> dial up to increase the volume again.
![](/library/attachments/ServiceWareImages/LDImages/SolutionAnswer/Elura_80_Elura_85_Elura_90/Set_dial.gif)