If your wireless router is equipped with Wi-Fi Protected Setup (WPS), you can configure your network with a simple button push.
Prior to begining this process check your routers documentation to confirm it can use WPS. Usually the router will have a button labeled WPS or with the WPS symbol (shown below). If you are not sure please contact your router manufacturer for support with the router.
![](/library/CANON/CITS_TECH_SUPPORT/BISG/DPIS/LBP151dw/b_C401.gif)
Procedure
1. Press and hold the
(Wi-Fi) indicator/ key on the front of the printer. Release the button when it begins to flash blue.
The Wi-Fi button is labeled number 5 on the diagram below of the Front Side.
![](/library/CANON/CITS_TECH_SUPPORT/BISG/DPIS/LBP151dw/b_MNC006.gif)
2. Press and hold the WPS button on the wireless router.
The button must be pressed within 2 minutes after performing step 1.
- Depending on the networking device, you may need to press and hold the button for 2 seconds or longer. See the instruction manuals for your networking device for help.
![](/library/CANON/CITS_TECH_SUPPORT/BISG/DPIS/LBP151dw/b_C494.gif)
The Wi-Fi indicator light will remain lit once connection has been made.