Cause
Cartridge cannot be recognized.
What to Do
A cartridge may not be installed properly or this printer does not support the cartridges.
If you are printing, press the printer's Stop button to cancel printing.
Remove the cartridges and reinstall them properly following the steps below. This may resolve the error.
-
Open the scanning unit / cover.
-
Open the right and left ink tank covers.
Important
- When removing cartridges, always open the ink tank covers. If the cartridges are removed without opening the ink tank covers, an Ink Flush will be required that will consume a large amount of ink.
-
Grab knob (A) on the cartridge locking cover to open it.
-
Remove the C (color) and B (black) cartridges.
Important
-
Reinstall the cartridges properly.
Install the C (color) cartridge in the left holder and the B (black) cartridge in the right holder.
Important
-
Close the cartridge locking cover and push it down.
-
Press down both joint buttons.
-
Close both ink tank covers.
-
Gently close the scanning unit / cover.
If this does not solve the problem, service is required.
For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account
Important
- If you unplug the power cord, all the faxes stored in the printer's memory are deleted.
- Do not tilt the printer when moving it since the ink may leak out.
- When transporting the printer for repairing it, see Repairing Your Printer.
PIXMA G4210 Page