| Search Results |
 |
How to install (mount) the VB-C50i / VB-C50iR
|
When installing the VB-C50i / VB -C50iR on the ceiling, check that the ceiling is strong enough to bear the weight of the VB-C50i / VB -C50iR including the mounting plate. Installation in a weak location could result in the VB-C50i / VB-C50iR falling and causing serious injury.
|
|
|
How to install (mount) the VB-C50FSi / VB-C50Fi
|
When installing the VB-C50FSi/ VB -C50Fi on the ceiling or a wall, check that it is strong enough to bear the weight of the VB-C50FSi/ VB -C50Fi including the mounting arm. Installation in a weak location could result in the VB-C50FSi/VB-C50Fi falling and causing serious injury. Check that the ceiling can hold either 3 times the weight of the camera and arm or 8kgs (whichever is heavier) for 1 minute.
|
|
|
Using the Card Slot over a Network - MX850
|
Troubles in the Network Setup of the Card Slot Change the workgroup name to "WORKGROUP", then click OK If none of the above procedure helps , disconnect the network drive for the Card Slot and mount it again following the procedure below. (1)
|
|
|
Service Notice: FAX Unable to Receive Automatically on the MF236n, MF247dw or MF249dw
|
Canon U.S.A., Inc For assistance , please contact our award winning customer service below. Canon Customer Support Center
|
|
|
MX850 LCD Menu
|
... Menu while in FAX mode. ... Press the < FAX > button. At the FAX menu, press ... FAX Settings FAX : The machine ... and receive the fax automatically. ... : Specify the FAX pattern in the DRPD:Set FAX ring pat. ... to receive only faxes automatically with your ... telephone line for FAX use only. FAX : The telephone ... ... automatically receive the fax . FAX priority mode When ... telephone line for faxes and voice calls ... want to receive faxes automatically: FAX : The machine ... will receive the fax automatically.
|
|
|
PC Faxing from a Mac (imageCLASS Fax driver)
|
This article explains the basic procedure for displaying the settings screen of the driver and sending a fax from an application.
|
|
|
Attaching a Cover Sheet (Mac Fax Driver)
|
[Signature] 8. Click [OK]. 9. Continue making the additional fax settings, then click [Print] to send the fax .
|
|
|
MP530 firmware v.1.08 upgrade procedure on Mac OS X
|
Upgrade the machine's firmware if the display freezes and shows [Memory in use: 10%] while attempting to send a group fax or sequential broadcast; or, an error occurs when sending a fax to a certain competitor's machine and the phone line conditions are poor.
|
|
|
System Requirements (MF7400 series)
|
System Requirements This section describes the system environments with which the machine is compatible. Printing or Sending a Fax from a Computer The following system environments are compatible when printing or sending a fax from a computer: OS
|
|
|
System Requirements
|
Supported Operating Systems Send Faxes : Supported : Not supported
|
|
