Search Results |
|
Using the SM-V1 microphone with compatible camcorders
Removing the microphone The memory card supplied with the SM-V1 can only be used to update the firmware of a compatible Canon camcorder; it cannot be initialized, nor used for recording. lf you attempt to initialize the memory card or record on it, the error message [Memory card is write-protected
|
|
|
List of error messages on a VIXIA HF10 camcorder
List of Messages The data transfer rate was too high for the memory card in use and the recording was stopped. Replace the memory card with one rated Speed Class 2 or higher.. BUILT-IN MEMORY ERROR
|
|
|
DVD-R/RW and DVD+R/RW are similar but generally non-interchangable formats. Canon DVD camcorders only use DVD-R/RW discs.
or DVD-R DL discs (DC10, DC20, DC100, and DC40 are not compatible with DVD-R DL discs). If a DVD+ R /RW disc is loaded into a Canon DVD camcorder the camcorder will display a "DISC ERROR " message after it attempts to read the disc.
|
|
|
Error Message VIXIA HF W10 _ HF W11
The clock is reset about one month after the battery is depleted. Therefore, “SET DATE/TIME!” will appear the next time the power is turned on. Set the clock again after charging the battery.
|
|
|
List of error messages on a VIXIA HF100 camcorder
List of Messages The data transfer rate was too high for the memory card in use and the recording was stopped. Replace the memory card with one rated Speed Class 2 or higher.. CANNOT COMMUNICATE WITH THE BATTERY PACK CONTINUE USING THIS BATTERY PACK?
|
|
|
Fixing ZoomBrowser EX "corrupted database" or "E_Fail error" message for EOS D30, EOS D60, PowerShot A10, A100, A20, A200, A40, G1, G2, Pro 901S, S110, S200, S30, S300, S330, S40, ZR45mc, ZR50mc, and GL2
ZoomBrowser EX is giving a ?corrupted database? or ?E_Fail? error message. How can I fix this? Method 1 - Deleting and Rebuilding the Database 1. If it is still running, Exit ZoomBrowser EX.
|
|
|
List of error messages on a HG10 camcorder
List of Messages Disconnect the USB cable and decrease the number of still images on the memory card to fewer than 1 ,800. If a dialog appeared on the computer screen, close it and then reconnect the USB cable. WHILE THE CAMCORDER IS CONNECTED TO A PC DO NOT DISCONNECT THE USB CABLE OR POWER SOURCE
|
|
|
List of error messages on a DC300 series DVD camcorder
List of Messages The disc is dirty or you attempted to play back a disc type not supported by this camcorder (not DVD- R /RW) or a disc that is dirty or scratched.
|
|
|
List of error messages on a DC40 DVD camcorder
List of Messages The disc is dirty or you attempted to play back a disc type not supported (not DVD- R /RW). This message can also appear if condensation has formed. Wait until the camcorder dries completely before resuming use.
|
|