| Search Results |
 |
Air travel restrictions information for carrying lithium and lithium ion batteries.
|
Travel Restrictions for Lithium and Lithium Ion Batteries http://safetravel.dot.gov/documents/airline_passengers_and_batteries. pdf ... In carry-on baggage, there is no limit to the number of consumer-size batteries or battery- powered devices that a passenger can carry for "personal use". ... http://safetravel.dot.gov/documents/airline_passengers_and_batteries. pdf
|
|
|
The World's Color and Power Systems (voltages and power outlets)
|
|
Power the camcoder on and set the camcorder to PLAY (VCR) mode.
|
|
Using a household power source to power the camcorder Elura 80, Elura 85, and Elura 90
|
|
Set the camcorder to CAMERA / TAPE mode
|
Set the POWER switch to CAMERA, and set the TAPE/CARD switch to TAPE
|
|
|
Specifications for the CA-570 Compact Power Adapter
|
Specifications for the CA-570 Compact Power Adapter Power supply 100 - 240 V AC, 50/60 Hz Power consumption 17W Rated output 8.4 V DC, 1.5 A Operating temperature 0 - 40 degrees C (32 - 104 degrees F) Dimensions 52 x 90 x 29 mm (2.1 x 3.5 x 1.1 in.) Weight 135 g (4.8 oz.)
|
|
|
Charging the battery pack for an Elura 80, Elura 85, and Elura 90
|
Charging the Battery Pack Connect the power cord to the adapter. Plug the power cord into a power outlet. Connect the power adapter to the camcorder's DC IN terminal.
|
|
|
Precautions for charging Canon rechargeable battery packs.
|
1. Recharge the battery on the day before or on the day it is to be used. Even during non-use or storage, a charged battery will gradually discharge and lose its power .
|
|
|
Installing or replacing the backup battery Elura 80, Elura 85, and Elura 90
|
Installing or replacing the backup battery Elura 80, Elura 85, and Elura 90 The backup battery (lithium button battery CR1616) allows the camcorder to retain date, time and other camcorder settings while the power source is disconnected. Connect a power source to the camcorder when replacing the backup battery to retain the settings.
|
|
|
Set [WL.REMOTE] to [ON] in the menu.
|
Setting [WL.REMOTE] to [ON] in the menu. appears. The wireless controller may not work properly when the remote sensor is situated under strong light sources or direct sunlight. If the wireless controller does not work after setting [WL.REMOTE
|
|
