| Search Results |
 |
Using the wireless controller WL-D85 Optura 60
|
Inserting the Battery The wireless controller operates with ...
|
|
|
Recording Movies on a Memory Card Optura 50 - Optura 60
|
Recording Directly to a Card with the Camcorder ... the camcorder to CARD CAMERA mode. ... the TAPE/ CARD switch to The card access indicator flashes ... ... the TAPE/ CARD switch, disconnect ... card while the card access indicator is ... ... are using a SD Memory Card, ... ... using a Canon SD Memory Card, or a SD Memory Card with ... more than 2 MB /sec. ...
|
|
|
Try another memory card in the camera and other troubleshooting steps.
|
On Camera LCD screen displays No Memory Card, Memory Card Error, Unrecognized File Format, Incompatible JPEG, or "?" marks for images when card is inserted in the camera or while attempting to Playback images. If the camera displays Memory card error, No Memory Card, or takes an abnormally long time to write an image to the memory card, when a memory card is inserted or any of the above error messages, make sure that the card is inserted properly. For SD card , make sure that the card lock switch is in the correct position and not stuck in-between. If this is the case, you may wish to Format the memory card in the camera using the Setup Menu option [Format] as shown below.
|
|
|
List of messages and their explanations that appear on Optura 50 and Optura 60
|
Memory Card Related Messages THE MEMORY CARD COVER IS OPEN Close the card cover. THE CARD IS SET FOR ERASURE PREVENTION SD Memory Card is set for erasure prevention. Replace the card or change the position of the protect switch.
|
|
|
Playing Back a Memory Card Optura 50 and Optura 60
|
Displaying images one at a time Set the camcorder to CARD PLAY mode. Set the POWER switch to PLAY (VCR) and the TAPE/ CARD switch to Press the CARD +/- button to move between images. ... Do not turn off the camcorder, change the position of the TAPE/ CARD switch, disconnect the power source, open the memory card cover or remove the memory card while the card access indicator is flashing. ... During movie playback: Press the CARD +/- ... button on the wireless controller) for 8x fast forward/fast rewind playback.
|
|
|
Recording from Analog Video Devices (VCR, TV or Camcorder) to an Optura 60
|
Recording the Input Video on a Memory Card button on the wireless controller, recording starts immediately. ... - The card access indicator flashes.
|
|
|
ERROR LCD: INSERT CARD or INSERT PHOTO CARD
|
|
Set the camcorder to CAMERA / TAPE mode
|
Set the POWER switch to CAMERA, and set the TAPE/ CARD switch to TAPE
|
|
|
Computers IEEE-1394 ports are not functioning correctly. Refer to computer mfgr.
|
When your Canon product is not detected via the IEEE-1394 port and proper operation has been confirmed on another computer this indicates a problem with the computers ability to access the device. Please contact you computer vendor or IEEE-1394 (Firewire) card vendor for support information regarding this interface.
|
|
|
Set [WL.REMOTE] to [ON] in the menu.
|
Setting [WL.REMOTE] to [ON] in the menu. appears. The wireless controller may not work properly when the remote sensor is situated under strong light sources or direct sunlight. If the wireless controller does not work after setting [WL.REMOTE
|
|
