| Search Results |
 |
Using the wireless controller WL-D85 ZR200, ZR300, ZR400 and ZR600 and ZR700
|
Inserting the Battery The wireless controller operates with ...
|
|
|
Air travel restrictions information for carrying lithium and lithium ion batteries.
|
Travel Restrictions for Lithium and Lithium Ion Batteries http://safetravel.dot.gov/documents/airline_passengers_and_batteries. pdf ... In carry-on baggage, there is no limit to the number of consumer-size batteries or battery- powered devices that a passenger can carry for "personal use". ... http://safetravel.dot.gov/documents/airline_passengers_and_batteries. pdf
|
|
|
The World's Color and Power Systems (voltages and power outlets)
|
|
Power the camcoder on and set the camcorder to PLAY (VCR) mode.
|
|
Using a household power source to power the camcorder ZR200, ZR300, ZR400, ZR500 and ZR600 and ZR700
|
Using a household power source to power the camcorder ZR200, ZR300, ZR400, ZR500 and ZR600/700
|
|
|
Set the camcorder to CAMERA / TAPE mode
|
Set the POWER switch to CAMERA, and set the TAPE/CARD switch to TAPE
|
|
|
Specifications for the CA-570 Compact Power Adapter
|
Specifications for the CA-570 Compact Power Adapter Power supply 100 - 240 V AC, 50/60 Hz Power consumption 17W Rated output 8.4 V DC, 1.5 A Operating temperature 0 - 40 degrees C (32 - 104 degrees F) Dimensions 52 x 90 x 29 mm (2.1 x 3.5 x 1.1 in.) Weight 135 g (4.8 oz.)
|
|
|
Precautions for charging Canon rechargeable battery packs.
|
1. Recharge the battery on the day before or on the day it is to be used. Even during non-use or storage, a charged battery will gradually discharge and lose its power .
|
|
|
Charging the battery pack for a ZR500 and ZR600 and ZR700
|
Charging the Battery Pack Plug the power cord into a power outlet. Charging, Recording and Playback Times Below times are approximate and vary according to the charging, recording or playback conditions.
|
|
|
Remove device from Device Manager, and reassociate driver with camcorder if the camcorder is not recognized when connected to the computer via USB
|
Removal of Device from Windows Device Manager Connect the camcorder's USB cable to the computer's USB port and make sure the POWER switch is set to PLAY (VCR) and the TAPE/CARD switch is set to CARD. Cancel or close any windows or messages that pop up. Right click on your My Computer
|
|
