| Search Results |
 |
Air travel restrictions information for carrying lithium and lithium ion batteries.
|
Travel Restrictions for Lithium and Lithium Ion Batteries http://safetravel.dot.gov/documents/airline_passengers_and_batteries. pdf ... In carry-on baggage, there is no limit to the number of consumer-size batteries or battery- powered devices that a passenger can carry for "personal use". ... http://safetravel.dot.gov/documents/airline_passengers_and_batteries. pdf
|
|
|
ERROR LCD : INSERT CARD or INSERT PHOTO CARD
|
|
The World's Color and Power Systems (voltages and power outlets)
|
|
Power the camcoder on and set the camcorder to PLAY (VCR) mode.
|
|
Set the camcorder to CAMERA / TAPE mode
|
Set the POWER switch to CAMERA, and set the TAPE/CARD switch to TAPE
|
|
|
Attaching the Battery Pack Elura 100
|
Attaching the Battery Pack Elura 100 Turn the POWER switch to OFF. Open LCD panel. Attach the battery pack to the camcorder.
|
|
|
Batteries may need to be recharged or replaced.
|
Batteries may need to be recharged or replaced if an error persists after battery recharge, or the unit may require a service evaluation. If the battery is currently in the device, and it is not working properly, remove the batteries and wait for 30 seconds and re-insert the batteries. In doing so, if your camera has a back-up or date and time battery, remove this battery as well.
|
|
|
Recording Movies on a Memory Card Elura 100.
|
Recording Movies on a Memory Card Holding the lock button on the < POWER > switch pressed down, set the switch to <CAMERA >.
|
|
|
Installing or replacing the backup battery Elura 100
|
Installing or replacing the backup battery Elura 100 The backup battery (lithium button battery CR1616) allows the camcorder to retain date, time and other camcorder settings while the power source is disconnected. Connect a power source to the camcorder when replacing the backup battery to retain the settings.
|
|
|
Specifications for the CA-570 Compact Power Adapter
|
Specifications for the CA-570 Compact Power Adapter Power supply 100 - 240 V AC, 50/60 Hz Power consumption 17W Rated output 8.4 V DC, 1.5 A Operating temperature 0 - 40 degrees C (32 - 104 degrees F) Dimensions 52 x 90 x 29 mm (2.1 x 3.5 x 1.1 in.) Weight 135 g (4.8 oz.)
|
|
