| Search Results |
 |
The camera LCD screen is black while outside.
|
The LCD Screen may appear black or blank if viewed while wearing "polarized" sunglasses. Polarizing lenses work by filtering out horizontal light that causes glare. This can also cut the light being shown thru the LCD of the camera.
|
|
|
Care and maintenance of the HDV series camcorders
|
Maintenance/Cleaning Protecting Tapes from Accidental Erasure
|
|
|
Using the Zebra Pattern function on the XH A1 and XH G1
|
Using the Zebra Pattern The zebra pattern is only displayed on the screen and will not affect your recordings. The zebra pattern will not be displayed while using the Peaking assist function. Available zebra pattern settings: 70 IRE, 75 IRE, 80 IRE, 85 IRE, 90 IRE, 95 IRE, and 100 IRE.
|
|
|
Using DV control on the XH A1 and XH G1 camcorders
|
Using the DV Control software (sold separately) to download video and audio recordings (in HDV or DV standards) from the camcorder to the computer's hard disk. For details refer to the software's help modules..
|
|
|
Adjusting the focus on a XH A1 or XH G1 camcorder
|
Adjusting the Focus When recording under bright conditions, the camcorder sets a small aperture value, and the picture may appear blurred. This may be more noticeable at wide-angle. When you are using a lens with built-in ND filter , turn it on/off according to the screen display.
|
|
|
Air travel restrictions information for carrying lithium and lithium ion batteries.
|
Travel Restrictions for Lithium and Lithium Ion Batteries A battery's electrical connections (also called contacts or terminals,) must be protected from contact with metal or other batteries that may cause the battery to short-circuit. You can do this in several ways.
|
|
|
Setting the White Balance on the XH A1 and XH G1 camcorders
|
Set the <POWER> dial to a recording program other than . - When you have turned on/off the built-in ND- filter of the lens, reset the custom white balance. Custom white balance may provide better results in the following cases: - Changing lighting conditions
|
|
|
Shooting still images while in movie mode with the XH A1 and XH G1 camcorders
|
Recording Still Images on a Memory Card When you are using an SD Memory Card, make sure that the protect switch is set to allow recording. When the Focus-Priority mode is set to [ON ]:
|
|
