| Search Results |
 |
The camera LCD screen is black while outside.
|
The LCD Screen may appear black or blank if viewed while wearing "polarized" sunglasses. Polarizing lenses work by filtering out horizontal light that causes glare. This can also cut the light being shown thru the LCD of the camera.
|
|
|
Using the Focus Assist Functions on the XH A1S and XH G1S
|
|
Using the VCR Stop and Power Saver settings on the XH A1S and XH G1S
|
In order to protect the tape and video heads, the camcorder will enter the power save mode (VCR stop
|
|
|
Recommended actions to take when the " REMOVE THE CASSETTE " message appears on a XH G1S or XH A1S
|
If the " REMOVE THE CASSETTE " message appears, the camcorder stops operating to protect the tape. If the " REMOVE THE CASSETTE
|
|
|
Remove the Cassette (blinking of slash cassette mark) message in LCD explained for the XH A1S and XH G1S
|
Load a cassette correctly. If the slash cassette mark is blinking and the remaining time on the tape is displayed(*), The cassette is protected . Check whether the position of the protect switch is set to REC.
|
|
|
Adjusting the focus on a XH A1S or XH G1S camcorder
|
Adjusting the Focus When recording under bright conditions, the camcorder sets a small aperture value, and the picture may appear blurred. This may be more noticeable at wide-angle. When you are using a lens with built-in ND filter , turn it on/off according to the screen display.
|
|
|
Air travel restrictions information for carrying lithium and lithium ion batteries.
|
Travel Restrictions for Lithium and Lithium Ion Batteries A battery's electrical connections (also called contacts or terminals,) must be protected from contact with metal or other batteries that may cause the battery to short-circuit. You can do this in several ways.
|
|
|
Transferring video recordings to and from a computer XH A1S and XH G1S
|
Transferring Video Recordings to and from a Computer Because procedures for digital editing software applications vary greatly, Canon cannot offer any additional support or suggestions regarding downloading and editing your video. Please refer to the software publisher or your computer manufacturer (if the software came with your computer) for assistance in using the software.
|
|
|
Shooting still images while in movie mode with the XH A1 and XH G1 camcorders
|
Recording Still Images on a Memory Card When you are using an SD Memory Card, make sure that the protect switch is set to allow recording. When the Focus-Priority mode is set to [ON ]:
|
|
|
Explanation of the custom presets on the XH A1s and XH G1s camcorders
|
Setting the Custom Preset Settings > dial, the full name of the currently selected item and its current value will be displayed at the bottom of the screen.. When you attempt to change a protected setting, " " starts flashing.
|
|
