| Search Results |
 |
How to use Tv (shutter priority) mode on the GL2.
|
When shooting outside on clear, bright days, the camcorder will often set a large F number to adjust the amount of light entering the camcorder, throwing the focus off. Setting a fast shutter speed or decreasing the amount of light with the ND filter can help correct this.
|
|
|
How to use the ND (Neutral Density) filter on the GL2.
|
|
How to format the memory card on the GL2.
|
Format new memory cards if you get the message CARD ERROR, or to permanently and quickly erase all still images on a memory card, including protected images. The SD Memory Card supplied with this camcorder has already been formatted for you.
|
|
|
Supported memory cards for the GL2 camcorder
|
Supported memory cards for the GL2 camcorder Your camera can be used with SD memory cards that conform to the Secure Digital standard. You may use multi media cards (MMC) with this camera; however, Canon makes no warranties concerning the use of multi media cards (MMC). The maximum capacity that may be used is 2 GB.
|
|
|
How to record still images on a memory card on the GL2.
|
Moving pictures cannot be recorded onto a memory card. Memory cards cannot record audio. When you are using an SD Memory Card, make sure the protect switch is set to allow recording.
|
|
|
Location of serial number for GL, XL, and XH camcorder models
|
Where is the serial number located? The serial number of this product may be found on the bottom of the camcorder near the tripod socket. You should record the number and other vital information in your user's manual in the space provided (normally at the bottom of one of the first few pages), and retain the manual as a permanent record of your purchase to aid identification in case of theft.
|
|
|
How to focus manual with the GL2.
|
All you have to do is point, and whatever is in the center of the display will usually be in sharp focus. If it does not seem to be focusing well, it may be because the subject is not suitable for autofocus. Also, if you attach a filter other than UV or ND, the autofocus may not work effectively.
|
|
|
How to remove a tape that will not eject
|
My tape will not eject. How can I get it out? Once the power source is available, some models require manually unlatching and opening a cover. When the cover is fully open, the cassette tape will eject automatically after a few seconds. If the tape still will not eject, seek assistance from a Canon Service Facility.
|
|
|
How to attach the lens hood to the GL2.
|
4. Finally, tighten the locking screw. To remove, reverse the above procedure. Since the lens hood cuts stray light that may cause flare and ghost images and protects the lens, be sure to attach the hood when you are recording.
|
|
|
Ordering parts for your product
|
Ordering Replacement Parts The hours of operation are 9:00 A.M. to 8:00 P.M. EST from Monday to Friday. When calling, speak the term "order parts" when the speech routing system asks the reason for your call. You will immediately be routed to the Parts Desk for assistance .
|
|
