| Search Results |
 |
What lenses are compatible with Correction for Peripheral Illumination and Chromatic Aberration?
|
IASES HJ 22 ex 7.6B IASES CJ45 ex 9.7B CJ45 ex 13.6B CJ24 ex 7.5B CJ14 ex 4.3B CJ18 ex 7.6B - - (*1) Requires B4 mount adapter. Also, chromatic aberration can be corrected if connecting with a 12-pin serial connection interface for dcasting.
|
|
|
Onscreen Displays on the HOME Screen of EOS C700 models
|
Onscreen Displays on the HOME Screen Temperature warning. The INFO icon appears when there is an important notice or error message in the INFO [LIVE] screen.
|
|
|
Setting the User Bit on the EOS C700 models
|
The user bit display can be selected from the date or the time of recording, or an identification code consisting of 8 characters in the hexadecimal system. There are sixteen possible characters: the numbers 0 to 9 and the letters A to F. That user bit information can then be recorded with XF-AVC clips. If the camera is set to output the time code, it will output also the user bit information.
|
|
|
Audio Settings and Recorded Audio Channels on an EOS C700 model
|
The camera features 4-channel linear PCM (24 bit , 48 kHz) audio recording and playback. You can record audio using the INPUT terminals (commercially available microphones, analog line-in audio sources, AES/EBU digital audio sources), the MIC terminal (commercially available microphones) or the built-in monaural microphone*
|
|
|
Available Video Configuration Settings for recording to a CFast card on an EOS C700 model
|
Available Video Configuration Settings (XF-AVC) Super 35mm (cropped) 4096x2160 3840x2160 YCbCr 4:2:2, 10 bit 810 Mbps, Intra-frame --- ---
|
|
|
Adjusting the Black Balance on an EOS C700 model
|
Adjusting the Black Balance If the sensor is not completely shielded from light, [ Error ] will appear on the control display. Press [OK] and repeat the procedure from the beginning.
|
|
|
Slow & Fast Motion Recording on the EOS C700 models
|
Slow & Fast Motion Recording 3840x2160 YCbCr 4:2:2 10 bit 1
|
|
|
Explanation of Gamma Transfer 1D LUT (1D Look-Up Table) and Gamut / Gamma Transfer 3D LUT (3D Look-Up Table) for cameras.
|
|
Onscreen Displays on the Shooting Screen of EOS C700 models
|
Onscreen Displays on the HOME Screen Lens error warning. 1: [Lens]
|
|
|
Synchronizing with an External Device on an EOS C700 model
|
Time Code Signal Input An external SMPTE-standard LTC timing signal received from the TIME CODE IN/OUT terminal can be recorded as the time code. The user bit of the external timing signal can also be recorded with clips. Before connectring the device, set the TIME CODE IN/OUT terminal to input with the procedure below and make sure the time code running mode is set to [Free Run].
|
|
