Onscreen Displays on the HOME Screen ) Power supply voltage (DC IN and battery): in red - low power warning. ... The power source currently in use is indicated with a ... The INFO icon appears when there is an important notice or error message in the INFO
Please see the following links for the white papers http://learn.usa.canon.com/app/ pdfs /white_papers/Deep-Dive-HDR-Part1. pdf High Dynamic Range (HDR) in the EOS C700 and EOS C300 Mark II Cameras PART 1
Attaching the GPS Reciver Press the Power button to turn off the camera. Attach the optional GP-E1 GPS Receiver to the camera's system extension terminal.
Setting the Audio Input Type for the INPUT 1/INPUT 2 Terminals To supply a microphone with phantom power , set the switch to MIC+48V instead. Make sure to connect the microphone forst, before turning the phantom power on. Keep the microphone connected when turning off the phantom power.
Adjusting the Black Balance If the sensor is not completely shielded from light, [ Error ] will appear on the control display. Press [OK] and repeat the procedure from the beginning.
Manual Focus If you focus manually and then leave the camera with the power turned on, the focus on the subject may be lost after a while. This possible slight shift in focus is a result of the internal temperature rising in the camera and lens. check the focus before resuming shooting.
Putting the Time Code Display on Hold When you mix drop frame and non-drop frame time codes, there might be a discontinuity in the time code at the point where the recording starts. When you are using the [Free Run] running mode, the time code will continue running as long as the lithium button battery has some charge left, even if you disconnect all other power sources. If you set an assignable button to [Time Code], you can press the button to open the [Time Code] submenu in the monitoring menu.
