Search Results |
|
CINEMA EOS C300 & C500
This transformation enables wide dynamic range digital intermediate processes to be performed in linear light space with minimum quantization errors . Mapping the High-bit Depth Canon Log to an 8- bit HD Digital Representation
|
|
|
List of Error Messages
|
|
Setting the User Bit
|
|
Recovering Data on the CF Card
Some actions, such as suddenly turning off the camcorder or removing the CF card while data is being recorded, can cause data errors on the CF card. In such case, you may be able to recover the data on the CF card.
|
|
|
Time Code Signal Output
The time code will be output from the TIME CODE terminal as an SMPTE-standard LTC timing signal. The user bit will also be output. Before connecting the device, set [
|
|
|
Time Code Signal Input
An external SMPTE-standard LTC timing signal received from the TIME CODE terminal will be recorded as the time code. The user bit of the external timing signal can also be recorded. Before connecting the device, set the TIME CODE terminal to input.
|
|
|
Adjusting the Black Balance
The automatic black balance procedure will start. 4 When the confirmation message appears, press SET If the body cap is not correctly attached, [ Error
|
|
|
EOS c500 & C300
It is the intent of this paper to examine the overall sensitometric characteristics of the EOS C500 and EOS C300 cameras. The C500 delivers 12- bit 2K/HD and 10- bit 4K/UHDtoexternal recorders. The on- board recording of the cameras utilizes a high-performance 50 Mbps 4:2:2 MPEG-2 codec.
|
|
|
Selecting the CF Card Recording Method
an error occurs with one of the cards, recording will continue on the other card. Double slot recording cannot be used with relay recording or slow & fast motion recording
|
|
|
Explanation of Gamma Transfer 1D LUT (1D Look-Up Table) and Gamut / Gamma Transfer 3D LUT (3D Look-Up Table) for cameras.
|