| Search Results |
 |
Adjusting the Black Balance
|
2 Attach the body cap to the lens mount . ... If the body cap is not correctly attached, [ Error
|
|
|
List of Error Messages
|
A 125) before adding any more. Recorded in 24.00 P standard Check the data on CF A/CF B Initializing the card is also recommended.
|
|
|
Recovering Data on the CF Card
|
Some actions, such as suddenly turning off the camcorder or removing the CF card while data is being recorded, can cause data errors on the CF card. In such case, you may be able to recover the data on the CF card.
|
|
|
Using a Tripod
|
The camcorder is shipped with the TB-1 Tripod Base for tripods with 0.95 cm (3/8 in.) screws. You can mount the camcorder on a tripod but do not use tripods with mounting screws longer than 5.5 mm (0.2 in.) as this may cause damage to the camcorder.
|
|
|
Using the LCD Panel
|
2 Open the LCD panel and adjust the screen to the desired position. Adjusting the LCD Panel for Shoulder Mounted Use 1 Open the LCD panel 90º until it is perpendicular to the monitor unit.
|
|
|
Preparing the Camcorder
|
NOTES Be careful not touch the lens mount or any components inside the lens mount area. Replace the body cap to the lens mount immediately after removing the lens from the camcorder.
|
|
|
Highlights of the EOS C300/C300 PL
|
Enjoy the freedom and creative versatility of using interchangeable lenses to achieve exactly the look you want. The EOS C300 features an EF lens mount allowing you to use a huge variety of high-quality Canon EF lenses, including the new high-end Cine Lens series, as well as other lenses. The EOS C300 PL features a PL lens mount, allowing you to use a vast array of Super 35mm cinematography lenses commonly used in motion picture production.
|
|
|
Selecting the CF Card Recording Method
|
an error occurs with one of the cards, recording will continue on the other card. Double slot recording cannot be used with relay recording or slow & fast motion recording
|
|
|
Recording Video
|
camcorder, the front of the camcorder (next to the lens mount ), the grip unit or the monitor unit. 3 Press the START/STOP button to pause the recording.
|
|
 |
EOS C300 / EOS C500
|
Typically, the RAW outputs from these cameras constitute a single output signal which is subsequently debayered to structure the three separate RGB video components. This process entails some degree of reconstruction errors depending upon the sophistication of the debayering algorithm. The EOS C500 and C300 cameras also employ the classic Bayer CFA – but we deploy an alternative strategy to the construction of the separate HD / 2K RGB frames as described in Reference [1].
|
|
