| Search Results |
 |
Loading the film- Elph 370Z
|
Loading the APS film ELPH370Z 1) Open the back cover and load the film Lift the crank (1) and turn to the left ( 2 ). 2) Insert film cartridge and close film compartment cover. 3) Slide main switch to the on position to turn camera on.
|
|
|
Using the Self-timer ELPH Z3
|
Using the Self-timer 2 ) Compose the picture and press the shutter button
|
|
|
How to set Custom Functions Elph 2
|
Select a function. • The selected function changes sequentially from CFI to CF 2 to CF3. and back to CFI. each time you press the SELECT button.
|
|
|
What the viewfinder indicator lights mean on the ELPH 2
|
Lights up: Flash has charged Blinks (4 times/sec.): Camera shake warning in "Flash OFF' mode (See ( 2 ) below)
|
|
|
Changing the flash modes in the ELPH 2
|
when you switch the camera back on . You can use the CF 2 custom function setting to specify that whichever flash mode is active when you switch off the camera should be stored in the camera's memory. Select the flash mode.
|
|
|
How to Imprint Titles on the ELPH LT
|
The title imprinting function automatically returns to a date/time setting after one frame is exposed. To continuously imprint the same title, hold down the Title button for two seconds or longer (until the word TITLE blinks on the LCD panel). Character size, shape, color, position, and ability to print on sides may vary according to the individual photo shop.
|
|
|
How do I choose a print type on the Elph Z3?
|
The black areas in the viewfinder do not appear on the print. When you take pictures at distances between 0.45~1m / 1.5~3.3ft. the area above the close-up frame is not photographed. For P prints, because of the large gap between the area visible in the viewfinder and the area actually photographed, shots should be taken from distance of at least 2 m (6.6ft)
|
|
|
How do I use the RC-5 Remote Control?
|
The red-eye reduction lamp blinks 4 times a second (or remains lit when red-eye reduction is used) and a countdown is displayed on the LCD Panel to show that the camera has received the signal from the remote control. The shutter is released approximately 2 seconds later.
|
|
|
How to imprint the date and time on your ELPH 2 photos.
|
Press the SET button to change the number. Hold the button down for 2 seconds or more to change the setting continuously Set all the date settings.
|
|
|
How to set Custom Functions?-Elph Z3
|
