Search Results |
|
Error messages appear on the LCD monitor. (EOS-1D X)
|
|
Explaination of error messages that appear on the LCD of the EOS Digital Rebel XS.
If a problem occurs with the camera, an error message is displayed. If your camera displays an error screen like the one shown above, follow the displayed instructions to resolve the problem. To recover from the error, turn the power switch < OFF > and < ON >, or remove and reinstall the battery.
|
|
|
When attempting to open Digital Photo Professional 4.X, [This program requires a display capable of 1024 x 720 resolution or more (Screen area).] is displayed and the program will not run.
Digital Photo Professional cannot be run when the resolution of your monitor is set lower than 1024×720, or when color setting are lower than High Color (16bit). In these cases, the below error message will be displayed.
|
|
|
How to connect the EOS Digital Rebel XS to a printer
>. 3. On the print setting screen, select [Print]. The error message will be displayed on the LCD monitor
|
|
|
EOS-1D X Mark III: Battery Information
Battery Information See if [Calibration is recommended when charging battery next time ] is displayed. If a battery communication error message is displayed, follow the instructions in the message.
|
|
|
EOS-1D X Mark III: Dust Delete Data Acquisition
Preparation If the data is not obtained successfully, an error message will appear. Check the information in , select [OK
|
|
|
EOS-1D X Mark III: Troubleshooting Guide
Troubleshooting Guide Inserting/Removing Cards Error Codes If a card error message is displayed, see and .
|
|
|
Installing and Removing the card on the EOS-1D X Mark II
2. Remove the card. If a card-related error message is displayed on the LCD monitor, remove and reinsert the card. If the error persists, use a different card.
|
|
|
EOS-1D X Mark III: Part Names
Part Names Multi-function lock warning ( No card warning ( Error codes (
|
|
|
How to install a firmware update on the EOS Digital Rebel XS.
If an ERROR message appears during the firmware update
|
|