| Search Results |
 |
Specifications of the EOS Digital Rebel XT.
|
... 14.8 mm Compatible Lenses ... compared to 35 mm format) Lens ... ... Horizontal) Color Filter System ... RGB primary color filter Low-pass Filter ... diopter with 50 mm lens at infinity ... 21 mm Dioptric Adjustment Correction ... to EF 600 mm f/4 ... ... , CF card error , no CF ... ... C with 50 mm f/1 ... Up to 17 mm focal length (equivalent to 27 mm in 35 mm format) External Speedlite ... In the single image with information display mode, the highlighted portions containing no image information with blink Image Protection and Erase Protection A single image can be protected or unprotected Erase
|
|
|
When Attempting to Open Digital Photo Professional, an Error Message Appears (Screen Resolution and Enlargement Scale)
|
|
Try another memory card in the camera and other troubleshooting steps.
|
On Camera LCD screen displays No Memory Card, Memory Card Error, Unrecognized File Format, Incompatible JPEG, or "?" marks for images when card is inserted in the camera or while attempting to Playback images. If the camera displays Memory card error , No Memory Card, or takes an abnormally long time to write an image to the memory card, when a memory card is inserted or any of the above error messages , make sure that the card is inserted properly. For SD card, make sure that the card lock switch is in the correct position and not stuck in-between. If this is the case, you may wish to Format the memory card in the camera using the Setup Menu option [Format] as shown below.
|
|
|
Understand "Cannot playback image" message on the camera.
|
Possible issues and resolutions If you have multiple memory cards, initialize another memory card and take some test shots. If images can be played back normally, the card that shows the error message may be malfunctioning. Try reformatting the faulty memory card to solve the issue.
|
|
|
How to print directly from the EOS Digital Rebel and EOS Digital Rebel XT.
|
The printing will stop and the paper being printed will be discharged. Resolving Printing Errors If an error occurs during printing, an error message will appear on the LCD monitor.
|
|
|
Batteries may need to be recharged or replaced.
|
Batteries may need to be recharged or replaced if an error persists after battery recharge, or the unit may require a service evaluation. If the battery is currently in the device, and it is not working properly, remove the batteries and wait for 30 seconds and re-insert the batteries. In doing so, if your camera has a back-up or date and time battery, remove this battery as well.
|
|
|
MESSAGE: "Caution you are attempting to collect XXXX images using camera window. This may affect the performance of the display."
|
|
Clean the lens contacts.
|
Mount the lens on the camera. Take a picture. If the error persists, the camera and/or lens may need be serviced by a qualified Canon Service Technician.
|
|
|
Does my camera have a Self Cleaning Sensor Unit?
|
Solution The Self Cleaning Sensor Unit is a unit that automatically shakes off dust attached to the image sensors front layer (low-pass filter ) with ultrasonic vibrations. The models that come with Self Cleaning Sensor Units are as shown in the table below.
|
|
|
How to use white balance correction on the EOS Digital Rebel XT.
|
You can correct the standard color temperature for the white balance setting. This adjustment will have the same effect as using a color temperature conversion or color compensating filter . Each color can be corrected to one of nine levels.
|
|
