| Search Results |
 |
Erasing images on the EOS Rebel T6
|
Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them. Erasing a RAW+JPEG image will erase both the RAW and JPEG images.
|
|
|
The Built-in Flash Fires a Series of Flashes before a Picture is Taken (EOS REBEL T6/EOS 1300D)
|
In dimly lit shooting conditions, pressing the shutter button halfway may trigger the built-in flash to fire a series of flashes to assist autofocusing. This is called AF-assist beam.
|
|
|
Formatting the card on the EOS Rebel T6
|
When the card is formatted, all images and data on the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images to a personal computer, etc., before formatting the card.
|
|
|
Error Messages (EOS REBEL T6/EOS 1300D)
|
When the card is formatted, all images and data in the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images and data to a computer, etc., before formatting the card.
|
|
|
Formatting a Memory Card (EOS REBEL T6 / EOS 1300D)
|
When a card is formatted, all images and data on the card are erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images and data to a computer, etc., before formatting the card.
|
|
|
Find the list of camera lenses compatible with Digital Lens Optimizer and Lens Aberration Correction - Digital Photo Professional
|
NOTE You can filter the displayed lenses by adding a checkmark to the [Select a lens category] checkbox. Using the Digital Lens Optimizer in Digital Photo Professional Ver.4.x
|
|
|
Troubleshoot reasons that RAW images can't be opened on a computer
|
Confirming the software version Open the version of Digital Photo Professional installed on the computer. Select Help -> About
|
|
|
The camera is not recognized by the computer (Windows 7) (EOS Utility Ver.3.x)
|
1. Change the USB port that is connected with the camera If multiple USB ports are available on the computer, switching the cable to another port may help the camera to be recognized correctly. 2. Use [Device Manager]
|
|
|
AF (Autofocus) does not operate (EOS REBEL T6 / EOS 1300D)
|
Do not touch the contacts directly by hand.Doing so could cause corrosion, and cause the camera to stop operating. When cleaning the lens contact, be careful to avoid scratching the lens surface. If the contact area is particularly dirty, contact a Canon customer service center for assistance .
|
|
|
Shooting Photos with the Default Settings (Immediately after Purchase) (EOS REBEL T6 / EOS 1300D)
|
As shown by the illustration, face the card's label side toward the back of the camera and insert it until it clicks in place. Write- protect switch IMPORTANT
|
|
