| Search Results |
 |
What's New: Canon's most affordable Wireless E-TTL
|
Click the Canon Digital Learning Center (CDLC) link below to access the in-depth article on the EOS System: What's New: Canon's most affordable Wireless E-TTL Note:
|
|
|
The Flash does not Fire during Wireless Flash Shooting
|
... not Fire during Wireless Flash Shooting ID ... ... fire when using wireless flash for shooting ... ... refers to the camera flash unit, ... refers to controlled wireless flash units. ... and Speedlite 430 EX (receiver) ... ... detailed information on wireless flash photography, ... refer to the camera /flash instruction ... Position the camera and receiver unit ... ... is used for wireless flash photography. ... depending on the camera /flash you ... ... came with your camera or flash unit ... ... so that the wireless sensor faces the ... Wireless Flash Shooting ... full-automatic wireless flash shooting mode ... ... the Speedlite 430 EX II.
|
|
|
EOS Digital Rebel XTi : How to view images on a TV set
|
Open the camera's terminal cover. Use the video cable (provided) to connect the camera's <VIDEO OUT> terminal to the TV monitor's VIDEO IN terminal. Insert the cable plug all the way in.
|
|
|
If the camera is not detected by Windows 7
|
1. Change the USB port that is connected with the camera If multiple USB ports are available on the computer, switching the cable to another port may help the camera to be recognized correctly. 2. Use [Device Manager]
|
|
|
Camera care and maintenance EOS Digital SLRs.
|
Use the following procedures to clean the camera body, lens, viewfinder, LCD monitor and other parts. Never use synthetic cleansers on the camera body or lens. If dirt remains, contact the closest Canon Customer Support Help Desk.
|
|
|
Troubleshooting steps for when the the computer does not detect the camera.
|
6. Connect the other end of the USB cable to the <DIGITAL> terminal on the camera . 7. Turn the camera's power switch to <ON>
|
|
|
The camera is not recognized by the computer (Windows 8)
|
1. Try connecting the camera to a different USB terminal. If there are multiple USB terminals on your computer, connecting the cable to a different USB terminal may allow the camera to be recognized by the computer. 2. Try using the Device Manager
|
|
|
Understand and resolve "There are no images in the camera or memory card that match download conditions" - EOS Utility
|
Troubleshooting Drivers & Downloads Check that the version of EOS Utility is compatible with your camera and is up to date . You can use the software on the EOS DIGITAL Solution Disk that came with your camera or download the latest software from . Try turning the camera off and then back on to reinitiate the connection to the computer.
|
|
|
EOS Digital Rebel XTi : How to set and use mirror lockup
|
Although remote control shooting can prevent camera shake, using mirror lockup to prevent camera vibrations can also help when you use a super telephoto lens or shoot close ups. Mirror lockup is enabled by accessing [Tools 2 Custom Function (C.Fn)] and setting [Mirror lockup] to [1:Enable].
|
|
|
Troubleshooting steps to follow if you cannot open images with the supplied software.
|
note: You can check the OS support status and software information on Canon’s software download pages. If you cannot open images or connect your camera to a computer even after having updated the software, the problem may be due to a cause not related to software.
|
|
