| Search Results |
 |
Approximate battery life of the 430EX II Speedlite
|
The average expected battery life is approximately 200 to 1400 bursts. The actual number will depend greatly upon a large number of variables (i. e . the batteries used, the scene being photographed, etc.)
|
|
|
Approximate battery life of the 430EX Speedlite.
|
The average expected battery life is approximately 200 to 1400 bursts. The actual number will depend greatly upon a large number of variables (i. e . the batteries used, the scene being photographed, etc.)
|
|
|
Compatible battery packs for the 580EX Speedlite.
|
The 580EX Speedlite is compatible with the Compact Battery Pack CP- E 3, CP- E 4 and the Transistor Pack E .
|
|
|
MR-14EX: Using an external battery pack with the Speedlite.
|
Compact Battery Pack CP- E 2 - uses six (6) AA-size alkaline, Ni-Cd or lithium batteries Transistor Pack E - uses Battery Magazine TP (six (6) C-size alkaline batteries) or Ni-Cd Pack TP
|
|
|
550EX Speedlite : Recycling times and number of bursts (flashes).
|
Uses Canon Battery Magazine TP (six size-C alkaline batteries) or Ni-Cd Pack TP Compact Battery Pack CP- E 2 Uses six size-AA alkaline or nickel-hydride batteries, lithium batteries can also be used.
|
|
|
Specifications of the 550EX Speedlite.
|
350 - 2200 Compact Battery Pack CP- E 2: 6 x AA Alkaline
|
|
|
How to install the batteries on the 270EX Speedlite
|
Do not fire more than 20 continuous flashes in a short time. If you fire more than 20 continuous flashes in a short time, the overheating prevention function may be activated and make the recycling time about 8 to 20 sec. If this occurs.
|
|
|
200E Speedlite : Here is a list of the Parts and controls - nomenclature
|
Directly Coupled Contacts Lock Switch Battery Chamber Cover
|
|
|
Reset C.Fn-5 is set to 0 (E-TTL).
|
If an external power source is used, the flash recycling is powered concurrently by the batteries and the external power source. In this case, when the batteries become exhausted first, shooting might not be possible. If 1 is set, the flash recycling will be powered only by the external power source.
|
|
|
QuickGuide to Speedlite Transmitter ST-E3-RT Setup
|
If a receiver powers-off, press the ST-E3- RT’s test flash button to turn the receiver back on. You can use C.Fn-10 on the receiver(s) to conserve battery power. This will reduce the auto power off time from a 60-minutes after the last shot taken to 10 minutes.
|
|
