... /64th power by using the ... Use a hand-held flash meter or trial-and error to determine the correct aperture for a given flash-to subject distance. Once set, the exposure will remain the same as long as the distance and flash power level remain the same. ... 2. Set the 320EX as the receiver unit by moving the power switch to <SLAVE>. ... 2. Set the 320EX power switch to <ON> ... 2. Set the 320EX power switch to <SLAVE>.
You can set the flash output from 1/64 power to 1/1 full power in full-stop increments Use a hand-held flash meter to determine the required flash output to obtain a correct flash exposure. Be sure to first set the camera's shooting mode to Av or M
The Macro Ring Lite MR-14EX can use either of the following tow external power packs. For details on the power pack, refer to the instructions of the respective power pack
Turns off the power Turns on the power Turns on the power and enables the SE (Save Energy) mode turns off the Speedlite automatically after a period of non-use as indicated in the following table.