| Search Results |
 |
The camera show E in Creative Zone when using the 580EX II
|
... -05- 1 is geared for ... ... -5- 1 is set for ... -05- 1 is set, wireless autoflash shooting will If "AF- assist beam 0FF" is set with the Speedlite or camera, the AF assist beam will not be emitted .
|
|
|
QuickGuide to Canon Speedlite 580EX II Modes and Functions
|
Press this button once if you wish to manually set the flash coverage angle. The 580EX II will otherwise adjust its coverage to your lens' focal length automatically. Press and hold this button if you wish to select one of the three wireless options (available only
|
|
|
580EX II Speedlite : How to set and use wireless flash with three receiver groups.
|
With the EOS ELAN II / ELAN II E / 50 / 50E, EOS REBEL G/500N, EOS IX, EOS IX LITE/IX7, EOS REBEL 2000/300 and REBEL XS N/REBEL G II/EOS 3000N/66, the flash ratio cannot be set with multiple Speedlites The flash ratio range of 8: 1 ~ 1 : 1 ~ 1 :8 is equivalent to 3 : 1 ~ 1 : 1 ~ 1 : 3 in stops ( 1 /2-stop increments)
|
|
|
QuickGuide to Canon Integrated Speedlite Transmitter Operation
|
Separately control flash compensation for off-camera Speedlites and the built-in flash Setting up an EOS 7D, 60D, or Rebel T3i (600D) to control one or more wireless Speedlites involves two basic steps: 1. Set up the camera for Integrated Speedlite Transmitter operation. 2. Set up the off-camera Speedlite(s) for wireless control.
|
|
|
580EX II Speedlite : How to set flash ratio with E-TTL II.
|
Setting the sender Unit and Shooting 1 . Set the wireless mode to <sender> 2. Disable the sender units flash firing
|
|
|
Reset C.Fn-5 is set to 0 (E-TTL).
|
With Type-A cameras, if C.Fn-05- 1 is set, wireless autoflash shooting will not be possible If "AF-assist beam OFF" is set with the Speedlite or camera, the AF-assist beam will not be emitted. With Type-B cameras, even if C.Fn-05-0 is set, E-TTL II/E-TTL autoflash will not work
|
|
|
580EX II Speedlite : How to set the communication channel on the Speedlite.
|
If there is another Canon wireless flash system nearby, you can change the channel number to prevent signal confusion. the sender and the receiver units must be set to the same channel number.
|
|
|
580EX II Speedlite : How to activate the modeling light feature on the Speedlite.
|
It enables you to see the shadow effect on the subject and the lighting balance. You can fire the modeling flash for wireless and normal flash shooting.
|
|
|
580EX II Speedlite : How to prevent the sender unit from firing its flash.
|
Even if you disable the sender unit's flash firing, it will still fire a preflash to transmit wireless signals
|
|
|
580EX II Speedlite : How to set and use the Second-Curtain Sync mode.
|
Stroboscopic flash cannot be set Wireless flash cannot be set
|
|
