5. Confirm wireless link. Confirm that the <LINK> lights on the 600EX-RT’s are lit and green and that the AF- assist beam emitter on the receiver is blinking at 1-second intervals. Also confirm that the red flash ready light is lit on the sender unit.
5 . Press the ... ... – AF- assist beam ... the flash’s autofocus assist beam off can ... ... : AF- assist beam + flash ... ... the AF- assist beam lamp of ... ... the AF- assist beam to blink ... 5 . Turn the ... Press the 600EX-RT’s Select/Set Button, and turn the Select Dial to choose any one of five settings. ... P.Fn-06 – Wireless button cycle sequence ... This option eliminates the optical wireless mode and cycles the operating modes in the following order: ... This option eliminates the radio wireless mode andcycles the operating modes in the following order:
Turn Select Dial to a channel from 1 – 4, then press the Select/Set Button on the 600EX-RT to register your choice. 5 . To set the Channel on Speedlite 600EX-RTs as receiver unit(s): a) Press Fn Button 4 until <MENU 2> displays.
Syl walks the audience through real-life situations, where the new radio-based wireless E-TTL system comes into its own. Included are a host of practical hints about modifying flash for the lighting look you want.