Search Results |
|
EOS R3: Specifications
Specifications ... image quality of 8 , ISO 100 ... ... image quality of 8 , ISO 100 ... 8 min. ... 46 hr. 23 min. 23 min. 8 min. 8 min. 8 bit / 10 ... 8 bit 23 mm eyepoint) Approx. 23 mm (at ... X -sync speed ... –1/ 8 * sec. ... 5 pins for X -sync and ... + 23 °C / ... + 23 °C / ... Approx. 8 hr. + 23 °C / ... + 23 °C / ... + 23 °C / ... + 23 °C / 73°F ... + 23 °C / 73°F ... Error correction functions using multiple MICHIBIKI satellites are not supported.
|
|
|
EOS R3: Troubleshooting
Responding to Error Messages Responding to error messages 21– 23 Also check the following points when responding to errors numbered 21–23. Are the camera and the access point set to use the same password for authentication?
|
|
|
EOS R3: Error Codes
|
|
Error 10 displayed on an EOS Mirrorless Camera.
An error code or message may appear on your product for different reasons. Please see the information information below regarding your specific error code that will explain the cause and provide you with the necessary steps for how to proceed.
|
|
|
EOS R3: Reference
Reference Troubleshooting Guide Error Codes ISO Speed in Movie Recording
|
|
|
EOS R3: Battery Information
Battery Information The shutter count is the number of still photos taken (not including movie recording). If a battery communication error message is displayed, follow the instructions in the message.
|
|
|
EOS R3: Dust Delete Data Acquisition
Preparation If the data is not obtained successfully, an error message will appear. Check the information in , select [OK
|
|
|
EOS R3: Inserting/Removing Cards
Removal If a card-related error message is displayed on the screen, remove and reinsert the card. If the error persists, use a different card.
|
|
|
EOS R3: Troubleshooting Guide
Troubleshooting Guide Inserting/Removing Cards Error Codes If a card error message is displayed, see and .
|
|
|
EOS R3: System Status Display
System Status Display Checking the Error Log Clearing the Camera Status Log
|
|