| Search Results |
 |
WFT-E9: Connecting in Camera Access Point Mode
|
Connecting with Easy Connection Activate the Wi-Fi function of the target device, then select the SSID (network name) displayed on the camera's monitor. For the password, enter the encryption key (password) displayed on the camera's monitor.
|
|
|
WFT-E9: Attaching to the Camera
|
... Attaching to the Camera Attaching to the Camera Set the camera's power switch to ... powered by the camera . Ensure the camera battery has sufficient ... Open the terminal cover on the camera . ... the system extension terminal cover and rotate ... ... Insert the transmitter terminal and attachment pin in the corresponding camera system extension terminal and attachment hole ... ... transmitter into the camera and turn the ... Set the camera's power switch to ... Attach the transmitter's terminal cap so that ... get in the terminal . ... , close the terminal cover of the camera . If wireless functions are in ... It is recommended that you do not use wireless functions when shooting movies.
|
|
|
WFT-E9: Checking the Type of Access Point
|
Checking the Type of Access Point To connect using an access point, check if the access point supports WPS*, which allows easy connection between Wi-Fi devices. If you do not know if the access point you will use is WPS-compatible, refer to the access point instruction manual or other documentation.
|
|
|
WFT-E9: Responding to Error Messages
|
Responding to Error Messages Did you hold down the WPS ( Wi-Fi Protected Setup) button on the access point for the specified period of time?
|
|
|
WFT-E9: Checking Network Settings
|
Checking Network Settings Open [ Terminal ... For information about [ Terminal ] see the Help menu on macOS.
|
|
|
WFT-E9: Checking the MAC Address
|
Checking the MAC Address The MAC address for [ Wi-Fi ] (with camera built-in), [Wired
|
|
|
WFT-E9: Positioning the Cameras
|
Positioning the Cameras Receiver cameras can be positioned up to approx. 100 m / 328 ft. from the sender camera. However, the distance supported for linked shooting may be shorter depending on the wireless communication conditions, which are affected by how the cameras are positioned, the usage environment, and weather conditions.
|
|
|
WFT-E9: Trademarks
|
Trademarks Alliance. WPS used on camera settings screens and in this guide stands for Wi-Fi Protected Setup.
|
|
|
WFT-E9: Configuring EOS Utility Connection Settings
|
Configuring EOS Utility Connection Settings ... Operation on the camera - 1 ... " represents the last six digits of ... ... [Pairing over Wi-Fi /LAN Select the camera to connect to ... If multiple cameras are displayed, identify the camera to connect to ... displayed on the camera's monitor. ... Operations on the camera - 2 When the camera detects the computer ... lamp on the camera will light in green. ... Settings information is stored in the camera . ... There is no need to complete pairing again if you continue using the camera to which the transmitter is attached and the computer together after pairing without changing the settings.
|
|
|
WFT-E9: Specifications
|
Specifications Camera access point mode, infrastructure* Wi-Fi
|
|
