| Search Results |
 |
Setting Receive Result Reports to Print Automatically
|
If an error code is displayed, see the "e-Manual" (HTML manual) in the CD-ROM supplied with the machine. ... If you want to print the report only when a receive error occurs: ... ] to highlight <Only When Error Occurs>, and then press [OK]. (2) Proceed to step 5. 5 . Press [
|
|
|
Setting a Communication Management to Print Automatically
|
If an error code is displayed, see the "e-Manual" (HTML manual) in the CD-ROM supplied with the machine. ... (3) Proceed to step 5. 5 . Press [
|
|
 |
User Support Tool
|
� A critical error may occur if another computer or application communicates with the machine (for example, when printing is performed) while the firmware is being updated. ... If a critical error does occur (the machine is turned ON but does not start up, etc.), the machine will need to be repaired. ... If <Via PC> is not displayed on the machine you are using, proceed to Step 5. 5 Select <Yes>, and then press [OK].
|
|
|
Fax Error Codes for L120
|
|
Fax Error Codes (L90)
|
|
Remove foreign object from paper feed area (B95)
|
|
Set RX (Receive) Start Speed to a slower setting (FAX-JX200)
|
If phone line conditions are less than perfect, transmission (send) and reception (receive) problems can occur. Decrease the reception (RX or receive) speed if frequent fax transaction error messages appear on the LCD.
|
|
|
Receiving faxes in memory when a problem occurs L170
|
Receiving faxes in memory when a problem occurs The machine will automatically receive incoming faxes into its memory if it encounters a problem that prevents it from printing normally. The LCD will display [RECEIVED IN MEMORY] and a message showing the problem. See below the error messages , their cause and the action you need to take to correct the problem.
|
|
|
Setting the Paper Size and Type
|
An error message appears or the machine may not perform as expected.
|
|
|
Load paper properly into the B45
|
Fan paper prior to inserting it into the Automatic Sheet Feeder (ASF). Slide the paper guide [2] snugly against the left edge of the stack. Note: Be careful not to press the paper guide strongly against the stack, or the paper will not be fed properly. If an error message appears on the display, press <STOP> to clear the error .
|
|
