| Search Results |
 |
Clearing jam from inside the machine (L120)
|
Inside the Machine Close the paper delivery tray extension (A), and then the paper delivery tray (B) itself. Caution: Do not close the paper delivery tray without folding the extension first. Open the cartridge cover by the notch (A).
|
|
|
Fax Error Codes for L120
|
Error Codes If you are making an overseas call, add a pause to the number. 008 D The recipient's machine has run out of paper . Ask the recipient to make sure that paper is loaded in their machine.
|
|
|
Memory Reception (L120)
|
Memory Reception The machine automatically receives faxes in memory when printing is disabled under certain conditions (i.e., toner or paper has run out). You can also set the machine to receive faxes in memory during a certain time period of your choice, with password protection if required.
|
|
|
Printer Properties Page Setup tab Win2000/XP L120
|
Page Setup Tab You can specify the dimensions for a paper size only in the [Printer Properties] dialog box ([Start], [Printers and Faxes ] (Windows 2000: [Printers])). You can specify the dimensions from the [Document Properties] dialog box (software application). lick this button to select options for printing dates, user name, page numbers, and borders, etc..
|
|
|
Cleaning the scanning area (L120)
|
Cleaning the Scanning Area Keep the scanning area clean to avoid dirty copies or faxes to be sent. ... Lift the paper stack cover and pull it out completely. Make sure the back end of the cover does not catch the front paper guide. ... Insert the paper stack cover.
|
|
|
Adjusting the contrast settings (L120)
|
Scan Settings Adjust contrast and image quality (resolution and image type) before sending a fax . Note that a higher resolution image requires more memory and takes longer to transmit. The image quality setting returns to the default value if no operation is performed for one minute, if you press <Stop/Reset>, or after the document is scanned.
|
|
|
Setting Paper Type and Size (L120)
|
Setting Paper Type and Size Use <Up/Down> to select [ PAPER SOURCE SETUP?] then press <Set>. 3
|
|
|
Using Coded Speed Dialing
|
Using Coded Speed Dialing Press <Start>. Press <Stop/Reset>, then <Set> to cancel sending the fax .
|
|
|
Entering sender information L120
|
Entering Sender Information Use <Up/Down> to select [2 USER FAX NO.?], then press <Set>. Use the numeric buttons to enter your fax number (up to 20 digits), then press <Set> twice. Use <Up/Down> to select [3 USER NAME?], then press <Set>.
|
|
|
Summary of Reports and Lists L120
|
Summary of Reports and Lists MEMORY IMAGE PRINT Shows information and the first page of a reserved job. 1 -TOUCH SPEED DIAL LIST Lists the names and fax numbers of recipients registered under one-touch speed dialing buttons. Also shows subaddresses, if set.
|
|
