| Search Results |
 |
Fax Settings Menu L170
|
Prints a report only when a transmission error occurs. REPORT WITH TX IMAGE Enables/disables printing of the first page of the fax
|
|
|
Connect the answering machine to the fax machine L170
|
Connect the answering machine to the extension port on the fax machine .
|
|
|
Connect the answering machine to the correct port on the fax machine L170
|
Connect the answering machine to the correct port on the fax machine .
|
|
|
Manual Sending Via the Handset
|
Manual Sending Via the Handset Use manual sending when you want to talk to the other party before sending a document, or if the other party does not have a fax machine that can receive automatically. Follow this procedure for manual sending:
|
|
|
Scanning a document into a Polling Box L170
|
Follow this procedure to store a document in the polling box. The document remains in the polling box so that other fax machines can poll it. To use polling sending, you have to previously create a polling box.
|
|
|
Memory Sending-L170
|
Memory Sending You should normally use memory sending to send documents efficiently. If [MEMORY FULL] is displayed, the machine cannot scan the documents. In this case, wait for the machine to send any faxes stored in the memory, then scan the document.
|
|
|
Common Settings Menu L170
|
Common Settings Menu the machien has finished sending faxes . ON 1
|
|
|
Cleaning of imageCLASS Products
|
For the purpose of helping to sanitize your Canon imageCLASS product, it is recommended that you clean parts touched with the hands such as control panels, covers and jam locations with isopropyl alcohol using the following precautions:
|
|
|
Receiving faxes using FaxTel Mode L170
|
Receiving faxes using FaxTel Mode Set this mode if you want your machine to automatically switch between voice and fax calls. You can control precisely how your machine handles incoming calls by adjusting the settings below.
|
|
|
Receiving faxes using Manual Mode L170
|
Receiving faxes using Manual Mode If you have an answering machine connected to your machine that can carry out remote- control operations ( controlling your answering machine from a remote telephone), the security code for this function may be the same as the two-digit ID code described above. If so, make sure you change the machine two-digit ID code to make it distinct from the answering machine's security code.
|
|
